-40%

808nm 1W 100μm Aperture TO-5 Laser Diode with FAC lens without cap

$ 52.8

Availability: 10 in stock
  • Return shipping will be paid by: Buyer
  • MPN: Does Not Apply
  • Condition: New
  • Restocking Fee: No
  • All returns accepted: Returns Accepted
  • Refund will be given as: Money Back
  • Brand: Current
  • Item must be returned within: 14 Days

    Description

    808
    nm 1W 100μm Aperture TO-5 Laser Diode with FAC lens without cap
    Description:
    This is an 808nm laser diode which can output 1W optical power from its 100μm aperture. The fast axis of the laser diode is collimated by a FAC lens. The laser was p-down bonded on TO-5 (9mm TO can), which was made in the USA. These TO-5 are not capped. It came to us with a lot of other electronic/opto-electronic related surplus. We have 10 such lasers in stock. The lasers are brand new not used.
    Specifications:
    Characteristics
    Specification
    808nm 1W TO-5 Laser Diode with FAC lens
    CW output power (W)
    1.0
    Peak wavelength (nm)
    808
    ±
    3
    Spectral width (nm)

    4.0
    Threshold current (A)

    0.4
    Operating current (A)

    1.50
    Slope efficiency (W/A)

    1.0
    Beam divergence θ

    ×
    θ

    (deg.)
    8/1.5
    Wavelength temperature coefficient (nm/

    )
    0.3
    Emitting area (μm)
    100
    ×
    1
    Lifetime(hour)
    >10,000
    Package
    TO-5 (9mm TO can), No Photodiode
    Data Sheet
    Available for each diode
    By Bidding, you must agree and accept:
    ·
    You are over 18 years old and understand the dangers and risks of laser use, and will use this component responsibly.
    ·
    You will use this component in a legal, safe manner to ensure audience and personnel safety.
    ·
    You have a working knowledge of laser diodes. You understand ESD, and the static sensitivity of this component.
    ·
    Laser beam is harmful for eyes during process. Please avoid any directly see on the aperture. Never shine laser beam on human or animals.
    ·
    You accept these diodes as electronic components for integrating them into a system designed by yourself. You relieve the SELLER, and E-bay from any and all LIABILITY from damage or injury that may arise from use of this laser.
    If you are not serious, please do not place a bid.
    Return policy:
    ·
    We will test the lasers before shipment; buyer should contact us as soon as he find it is defective;
    ·
    Refund request should be made within 14 days buyer receives the product;
    ·
    Replacement request should be made within 30 days buyer receives the product;
    ·
    Since this is a Do-It-Yourself laser diode, we only refund if the product arrive to be defective; so please use it gently and properly when you assemble your device; you also need to send back in original shape to get refund/replacement; we won't refund or replace if the laser was damaged by buyers;
    Some tips for operating laser diode:
    ·
    Please use a power supply with stable output. Transient current spikes should be avoided.
    ·
    Please always connect the pins correctly.
    ·
    Heat sink with good thermal dissipation is required for holding the laser otherwise the laser will be burned.
    ·
    Please use eye protection when you operate the laser.
    ·
    It is better to wear an antistatic wrist band.
    ·
    You should always start with current well below the diodes maximum (about 1.5 amps in this case).